Visit our online store at www.cyclesolutionsonline.com
 

Another example of an extended K&P Engineering Oil Filter/Cooler hard at work to protect your engine!

Cycle Solutions Inc. received a negative post in regards to a K&P Oil Filter a few days and we thought we would take a few minutes and break down what this really means.  Our customer had a cam upgrade completed by us in Daytona this spring and our cam upgrade package includes our extended K&P Oil Filter made exclusively for Cycle Solutions Inc. by K&P Engineering.  Why does a camchest include a K&P Oil Filter? Because this quality part flows the oil faster than a paper filter and helps cool the engine oil down.  This filter is also washable and re-useable making it environmentally friendly!  Since you can take it apart to clean it you can see the debris that is coming out of your engine to help evaluate and head off possible problems in your motor.

The customer is stating that the filter had tape on it and Cycle Solutions installed this oil filter, tape and all and it went into his oil filter.  K&P oil filters do not come with any tape in the package nor on the filter.  The only tape on the package is to hold the lid on the plastic container that all the components come in.  Below are some images showing the filter right out of the package as well as what came out of this persons motorcycle.  Thank goodness the filter did its job and kept the tape from going back in the engine.

We wanted to share this with our customers and potential customers so they can see the power of the K&P Oil Filter!  Since this filter flows the oil faster it can help clean out your motor and remove particles that shouldn’t be there.  Our best guess in this case is that what this customer found in his washable/re-useable oil filter is remnants of a paper filter that was installed previously on his 2014 Street Glide.  This debris could have been in there for a while and finally worked itself out and it was more than likely due to the help of the new oil filter.  It is so easy to blame the last person that touched your motorcycle but sometimes stuff just happens and it may seem to be in regards to something recently done.  If you go to the doctor for a stomach ache and after being treated you come down with a toothache then should we blame the doctor right?  You didn’t have the toothache before you went so it makes sense that the doctor is to blame for your toothache.  NOT!  Reality is that motorcycles have motors and moving parts that can fail at any given time.

In closing, here are a few words from the maker of the K&P Oil Filter Cooler:

“This is just another example of why our filter is so much better than a paper filter.  We see plenty of other examples of shocking debris being washed out of engine cavities due to the higher flow of our filter.” – READ MORE

Another truth is that Cycle Solutions does care about their customers and their motorcycles.  We have not been in business for over 15 years by using tape to install cam upgrades and oil filters.  We do thousands of cam upgrades each year and we only use quality products.  We do not sell cheap sub par products nor do we offer sub par work.

 

Milwaukee Eight Oil Pressure Gauge Now Available!

Milwaukee Eight powered motorcycles do not have an oil pressure gauge and adding a conventional oil pressure gauge is difficult. The all new Revolution Performance Milwaukee Eight oil pressure gauge is a complete, made in the USA, bolt-on solution that includes everything you need to install a premium oil pressure gauge with zero hassle.

Revolution Performance Milwaukee Eight oil pressure gauge kit includes:

  • Premium oil pressure gauge
  • Top mounting bracket
  • Retention plate
  • (2) Lock nuts
  • Male compression fitting
  • Female compression fitting
  • Tee fitting
  • 1/8″ Nylon tubing
  • Heat shield tube
  • O-Ring
  • (3) Shims

GET YOURS HERE!

 

New Arlen Ness “Drift” Series Air Intakes

Arlen Ness has released a new air intake style to their already popular Inverted Air Intake series.  Check out the new Drift.  This style is available in contrast black and in an all chrome version.  If you have been searching for a new intake for your Milwaukee Eight , FL Touring model or any other Harley-Davidson model then this may be a good look for you.

Cycle Solutions Inc. will be in Leesburg, FL and Panama City Beach, FL in upcoming weeks

The Leesburg Bikefest is just around the corner and Thunder Beach Spring Rally in Panama City Beach, FL is right behind it.  Cycle Solutions Inc. will be attending both of these events bringing all the services and products that we offer from our Fort Myers Beach location to the shows.

The Fort Myers location will have limited hours during the times that we travel so if you want to have work completed at that location then please check our schedule page and call ahead to get scheduled.

 

Leesburg Bikefest is April 26th, 27th and the 28th 2019

 

Thunder Beach is May 1st through May 5th 2019

If you would like to schedule an appointment for either of these shows then you can email Kimberly at [email protected] to get scheduled or you can call Chris at 765-730-1646.  Our inventory will be fully stocked with D&D Exhaust Systems, Thundermax Auto Tune Modules, Zippers Red Shift, Feuling and T-Man Camchest upgrades as well as big boar kits by Revolution Performance and our CSR 131″ Complete Engines.

Beat the price increase on select Ohlins HD shocks by purchasing before May 1st

Ohlins has just announced that there will be a price increase that will take affect on May 1st, 2019 on some of their most popular rear shocks for HD models.  Cycle Solutions Inc. will receive the same price increase so we have no choice but to pass the price increase onto our customers.  If you have been on the fence about purchasing one of these fantastic shocks for your motorcycle then get off the fence and purchase now to avoid the $45.00 price increase.  Ohlins are an expensive upgrade but they are worth the investment.  Why wait and pay more?  Get rid of that junk factory shock once and for all and start enjoying the ride again.  Your passenger will approve also!

Starting May 1st the new price will be $895.00 for the following suspensions:

HD 159, HD 753, HD 762, HD 772, HD 774, HD 781, HD 816, HD 907, HD 928

If you would like to have your Ohlins suspension professionally installed and set up then please come see us at our Fort Myers, FLlocation or at one of the events we attend.  We also offer installation on the Ohlins FKC101 and 102 Front Fork Cartridge kits. Call for an Appointment today 765-730-1646