Visit our online store at

Time to show your Indian motorcycle some love with the new Love Jugs Engine Cooling fans.

Cycle Solutions Inc launched the Love Jugs engine cooling fans for Harley models at Daytona Bike Week. Why is this product taking the market by storm? Because this product does everything it was designed to do….Keep your motorcycle from overheating and causing expensive damage to your engine. Harley owners were the first ones to enjoy the benefits of this product but now Love Jugs is launching the same product line for 2014-Newer Indian motorcycles.

What is nice about the Indian Love Jugs is that there are no special mounting kits or adaptors that you need to purchase in order to install. Just purchase the fans and have your Indian running cooler in a matter of 15 minutes! The Indian Love Jugs are available in all the same styles as the Harley version and they are expected to be available for shipping starting July 20th.

Here are some of the features for those of you who have not seen the LOVE JUGS products:

  • This system uses a low amperage draw to operate. It uses a maximum of 3.2 Amps
  • Love Jugs manufactures the most powerful, and by far the most effective, high performance, waterproof fans available
  • Love Jugs are designed and manufactured to be the highest quality in every regard
  • Love Jugs are by far the most powerful and effective cooling system available
  • It has been proven and well known that a LOVE JUGS cooling system will lower oil temperatures
  • 100% waterproof! They will actually run while submerged underwater!
  • On/Off switch on the front of the fans so you can turn them on and off as needed
  • Love Jugs are rated for a minimum of 20,000 hours of life. They provide you with a full year 100% warranty on electrical components and three (3) year warranty on all other parts

Want to see them in action? Check out this video of the Love Jugs clearly cooling down a overheating engine.

View on YouTube

All Love Jugs are available on our website. CLICK HERE to see the styles and finishes. If you have questions about which mounting kits to use please give us a call at 765-768-6000.

Never have to buy another oil filter again!


Cycle Solutions Inc. sells a lifetime oil filter for Harley Davidson motorcycles in two different sizes and filters that fit Indian’s, Victory’s and many different metric motorcycles. This lifetime filter filters oil faster than an standard paper filter and our EXCLUSIVE Extended version filters oil 8.2 times faster plus it can reduce your oil temperature up to 50 degrees! There is one fitment for Harley FLH Touring, Dyna’s, Softail’s and Sportster’s so even if you purchase a new motorcycle you can still use the filter to get the most out of your investment. The K&P Lifetime Oil filter is a great way to be more environmentally friendly. Never have to put another filter in the ground. Product Details:

  • This is the most technically advanced oil filter you can buy
  • Consistent filtering across the entire surface of the filter
  • Superior ASTMF316 filtration performance
  • 7 times the flow of a comparable paper oil filter
  • Magnetic prefiltering
  • Billet aluminum filter case doubles as an oil cooler
  • Progressive rate bypass combined with hi-flow charateristics of the filter media avoids unfiltered oil bypassing the filter during cold start up and high rpm
  • No more filters to toss in a landfill
  • Maybe the last oil filter you ever buy
  • Inspect, Clean, Reuse!




Heat Reduction for Your Trike Motorcycle

Heat Reduction for Your Trike Motorcycle

The number one complaint heard at rally after rally from customers, “My bike is running extremely hot”. Then the question comes next,” What can I do to reduce the heat generated by my motorcycle?” Good question and we hope to shed some light on solutions to this ever growing problem.

The Environmental Protection Agency (EPA) in their good sense to protect us from harming the environment any more then we have, has placed stringent emission and mileage numbers on manufacturers of motor vehicles. Harley Davidson has in turn had to tune motors to run leaner then they would like to meet these EPA requirements to continue to sell motorcycles. Tuning a motor to run lean makes it run hotter and generate more heat.

Motorcycle trike owners are faced with a greater load on the motor with the addition of the rear axle and third tire and wheel. The motor must work harder generating even more heat over the two wheeled model it was built from.

Cycle Solutions has solutions:

Fuel Injection Management Tool (Tuner)
There is one aftermarket tuner used and sold by Cycle Solutions to return trike motorcycles to a correct Air to Fuel (A/F) ratio. The Zippers Thundermax fuel management system has been tried and tested to deliver peak performance and efficiency to the motorcycle it is installed on. Benefits you will notice are: quicker throttle response, increased power and a cooler operating temperature. This tuner is installed and the software for the motor and performance upgrade combination is downloaded to the tuner unit. The tuner having Auto Tune features built in the unit does not need the use of a dynamometer (Dyno) to complete the tune. The tuner uses the road and the motorcycle which act as a Dyno to constantly calibrate the correct A/F ratio, timing and ignition needs of the motorcycle.

Cycle Solutions carries a good variety of Vance & Hines and Rush exhaust systems designed to deliver performance and style to your motorcycle. The aftermarket exhaust systems allow the spent hot exhaust gases to exit the motorcycle faster and more efficiently, thus reducing the heat buildup and heat radiation experience from stock exhaust systems. The Rush head pipes are ceramic coated inside and out and drop the radiant heat from the pipes some 300 to 400 degrees. Should you have a pair of aftermarket slip on mufflers already, head pipes are available from the two manufactures above to complete the exhaust change out. 2010 through 2013 Harley Davidson Triglides really see a heat reduction and exhaust flow increase with the removal of the stock head pipes containing the catalytic convertor.

Air Cleaner (Breathers)

The third part of the cooling reduction upgrade is an aftermarket free breathing air cleaner assembly to deliver the air flow needed to bring your motorcycle to its peak potential. A stock restrictive air box limits air flow into the motor and therefore smothers the motor. The air cleaner when used with the aftermarket exhaust and tuner creates a much cooler running motor.

Oil Coolers
Many trikes come delivered with a factory or aftermarket oil cooling device. Due to restrictions in the filtration material used in most stock motorcycle oil filters, oil flow through the cooling device is not used to its potential. Cycle Solutions has found the cure for this problem, A K&P Engineering oil filter. A ribbed billet aluminum oil filter designed to increase oil flow and reduce the oil operating temperature by 20 degrees or more. The increased flow rate circulates the oil through the before mentioned factory or aftermarket oil cooling devise many times faster making it work more efficiently. The stainless steel filtration material used in the standard K&P filter flows 5.2 times that of a stock Harley Davidson replacement filter. The new K&P XL billet oil filter flows 8.1 times that of a stock oil filter. Coupled with the fact that the filter is a washable lifetime oil filter, money can be saved in the long run while making your motorcycle run cooler.

All four products in part or together will give you riding comfort and performance with a lot less heat. See a Cycle Solutions representative and ride a COOL bike today.