Visit our online store at

Fall Specials! Cool down that hot engine with heat reduction products like Love Jugs, K&P Oil Filters, Lucas Motorcycle Oil Products and CSR Ceramic Coated Headers

Order any of these products now and save 10%

Temperatures may be cooling down outside but that doesn’t mean that your engine is. We have so many customers that come to us stating that their motorcycles are running super hot and they are looking for ways to cool it down and be able to ride again without worrying about damage caused by overheating.  We have products that can help with this issue that have been tried and tested.  These products are worth the investment:

Love Jugs:   These fans are installed on the factory horn mount and blow air across the cylinders to keep them from getting in an overheated state.  You control when they run and for how long either by your accessory switch or by turning them off and on manually. A lot of people are skeptical if the fans really work and we can honestly say Yes! they do work.  We have the Mighty Might fans installed on all of our V-Twin motorcycles which allows us to ride anywhere.  Stop and go traffic? No problem.  We have never seen a motorcycle overheat after the installation of these fans.

Some customers raise concerns about the hot air that the fans blow over to the right side of the motorcycle.  Here is our response.  The fans are going to help cool the cylinders down so the air will be warm but not ridiculous.  If you are riding a motorcycle now that overheats or runs so hot it is on the verge of overheating then what does it matter?  The fans are designed to cool the motor, not the rider.  Cycle Solutions Inc offers many products that can help with heat.  You can check out our heat reduction packages to get that heat in check.

K&P Engineering Oil Filter Coolers: K&P manufacturers the best oil filters period. These filters are made from billet aluminum with a stainless steel filter insert that can be cleaned and re-used. The finned case and the faster flowing stainless steel filter media also performs as an oil filter cooler that will help cool down your engine oil.  The S44 and S69 lengths are a Cycle Solutions Inc exclusive product and can only be purchased from our website, show truck or shops. There are other companies selling a knock off version of the K&P Oil Filter. Do not be fooled. They are cheaply made and do not perform.

Lucas Motorcycle Oil Products:  It is no secret that by using Lucas oil products you can reduce some heat in your motor.  Cycle Solutions uses Lucas Oil Products exclusively so if you have had us do your oil change in the past then you have experienced the benefits of Lucas Oil.  Lucas Oils are proven to run cooler and also to help your engine run quieter.  All of their oils are superior and are a great companion to the K&P Oil filter we spoke of above.  Don’t forget the Lucas Motorcycle Oil Stabilizer!  This additive is designed to reduce heat and friction extend your oil life and helps against oil breakdown due to overheating.

CSR Ceramic Coated Headers:  CSR has installed a lot of head pipes over the years.  We know which ones perform better and which ones are easier to install.  We have combined all the qualities that riders look for in a header and sell our own line of performance headers.  All of our headers have ceramic coating inside and outside of the pipe to help keep heat in.  Our pipes reduce the amount of heat you feel on your legs and when paired with a quality tuner like a Thundermax Auto Tune they will also help the engine run cooler.  Our headers are available as a true dual style or one with a cross over chamber for more low end torque.

All of our heat reduction products can be purchased at 10% off for a limited time. Use coupon code FALL2018 at check out and take advantage of the savings.

Speak Your Mind